ANSI valves

This catalogue introduces ours ball
valves type “3 piece side entry” and “1
piece fully welded”. Basic technical
specifications are also included. These valves have been developed to meet all the requirements for pipeline services in open/close operating position according to API Spec 6D. The material, design and operating requirements, such as temperature, type of fluid, pressure, and etc. described in this catalogue are basic
specifications only, and these may be
altered upon customer’s requirements.

KMC manufactures high quality ball valves to various standards and specifications. Our products are used in gas transmission, district heating pipelines, offshore platforms, oil fields, chemical plants, etc. And are highly regarded by our customers. We are confident that ball valves will be used all over the world where quality and reliability cannot be compromised. We can deliver on time and be competitive as well.

Inquiry&Order requisition.
Ball valves will be supplied to standard specifications unless otherwise requested during quotation and clearly specified when order is placed.
Terms and conditions.
Refer to the details in the last page of
the catalogue.

Ball valves specifications.
Basic specifications are as follows:
1.        Size: from 2”(DN 50) up to 48”(DN1200)
2.        Pressure: ANSI Class 150# (PN20), 300# (PN50), 600#(PN100), 900# (PN150) 1500# (PN250), 2500# (PN420), etc.
3.        Materials: Body, Ball, Stem, Trunnion, Seat, Seal O-ring, Stud Bolt/Nut, Spring, etc.
4.        Bore type: Full bore or regular/Reduced bore type.
5.        End Connections: Flanged ends, Welded ends, Screwed     ends, etc.
6.        Types of operator: Lever, Gear, Actuator, etc.
7.        Working temperature: -60˚C ~ +350˚C
8.        Documents: Manufacturer’s inspection to be final, inspection report, raw material certificates, etc.
9.        Other special requirements & options, etc.

Automatic operatiors.
Ball valves are manufactured with a top flange to facilitate the mounting of actuators separately procured by customers at their own expense. However upon request, we can also supply and install such actuators according to customer’s requirements.

Basic specifications required are as follow:
Types of automatic operator-Electric, Pneumatic & Hydraulic
1. Electric: Ambient Condition, Components, Power Supply, type of motor (Protection Degree, Insulation Class), Accessory (Limit Switch, local Indicator, Torque Switch, Hand wheel), etc.
2. Pneumatic & Hydraulic: Line Pressure, Medium, Options Accessory, etc.

AYNA is looking for having a good opportunity throughout this pre-qualification. Do not hesitate, any questions or any enquiries would be very appreciated. Contact us once, keep this file on your desk for up-coming business.