Class 150 lever type

Around the world, Your best selection for high quality ball valves !

AYNAVALVE

AYNA is looking for having a good opportunity throughout this pre-qualification. Do not hesitate, any questions or any enquiries would be very appreciated. Contact us
once, keep this file on your desk for up-coming business.

LEVER TYPE

Material Specification
API 6D SIDE ENTRY BALL VALVES(FLANGED/ WELDED ENDS)

Material Specification
BODY C/S- ASTM A216 Gr. WCB, A106 Gr. B, A105,
               A352 Gr. LCB
       S/S- CF8, CF8M, A182 F304/316, Duplex

BALL   C/S- A105, A216 WCB, A352 LCB+ENP or Chrome
       S/S- ASTM A351 CF8/CF8M, AISI 304/316,
               A217 CA15, Duplex

STEM C/S-A105, AISI 1020 + ENP or Chrome
       C/S-A105, AISI 4140 + ENP or Chrome
       S/S- ASTM A182 F304/316, Duplex

SEAT   METAL SEAT WITH INSERT RING
       C/S- A36/A216+ENP or Chrome
       S/S- ASTM A351 CF8/CF8M, AISI304/316
       S/S- ASTM A743 CF8/CF8M, AISI304/316
SEAL   GRAPHITE, PTFE, FPM, VITON, etc.

SPRING          ASTM B637 Gr.688, Inconel X-750
                      AISI 304/316

TRUNNION     AISI 304/316, A105+ENP or Chrome
STUD BOLT/NUT A193 B7, A194 2H, A320 L7M, A1947M
                      A193 B7M, A194 2HM, A193 B8, A1948M

PRESSURE RATING ANSI CLASS 150,300, 400, 600,900
                            1500, 2500

* The above is a typical listing or materials for standard applications
* The materials may be adjustable at user's request

NOTE

DESCRIPTION

BODY
BALL
OUTER SEAT RING
SEAT O RING
INNER SEAT RING
SEAT KEY
U CUP RING
O-RINGS
SEAT COIL SPRING
CLOSURE FLANGE
BODY O RING
STUD BOLT/NUT
GREASE FITTING W-CHECK V/V

RELIEF V/V
WRENCH BOLT
NECK FLANGE
GRAPHITE PACKING
WASHER
GLAND BUSH
STEM O RING
GREASE FITTING
(SEALANT INJECTOR)
NECK-S
NECK O RING
STEM KEY
STEM-S
TRUNNION
TRUNNION O RING
DOWEL PIN
DRY BEARING
THRUST WASHER
BEARING RETAINER
DRAIN PLUG
END PIECE

* Valves are in Inch, Dimensions are in mm.
* Face to face dimensions in accordance with API 6D & ANSI B16.10.
* Flanged Ends in accordance with ANSI B 16.5
* Butt Weld Ends in accordance with ANSI B 16.25

SIDE ENTRY CLASS 150 DIMENSION

SIDE ENTRY CLASS 300 DIMENSION

SIDE ENTRY CLASS 600 DIMENSION

SIDE ENTRY CLASS 900 DIMENSION

SIDE ENTRY CLASS 1500 DIMENSION

SIDE ENTRY CLASS DIMENSION