Class 150 Lever type, fully welded ball valves;;;;;

* The above is a typical listing or materials for standard applications
* The materials may be adjustable at user's request

AYNA is looking for having a good opportunity throughout this pre-qualification. Do not hesitate, any questions or any enquiries would be very appreciated. Contact us
once, keep this file on your desk for up-coming business.

Material Specification
BODY C/S- ASTM A216 Gr. WCB, A106 Gr. B, A105,
                  A352 Gr. LCB
         S/S- ASTM A351 CF8/CF8M, A182 F304/316

BALL   C/S- A105, A216 WCB, A352 LCB+ENP
         S/S- ASTM A351 CF8/CF8M, AISI 304/316,
                  A217 CA15

STEM C/S-A105, AISI 1020 + ENP
         C/S-A105, AISI 4140 + ENP
         S/S- ASTM A182 F304/316,AISI 304/316

SEAT   METAL SEAT WITH INSERT RING
         C/S- A36/A216+Nichel Coating
         S/S- ASTM A351 CF8/CF8M, AISI304/316
         S/S- ASTM A743 CF8/CF8M, AISI304/316
SEAL   GRAPHITE, PTFE, FPM, etc.

SPRING          ASTM B637 Gr.688, Inconel X-750
                        AISI 304/316

TRUNNION     AISI 304/316 or Equivalent
STUD BOLT/NUT A193 B7, A194 2H, A320 L7M, A1947M
                        A193 B7M, A194 2HM,

PRESSURE RATING ANSI CLASS 150,300, 400, 600,900
                              1500, 2500

1 BODY
2 BALL
3 OUTER SEAT RING
4 SEAT O RING
5 INNER SEAT RING
6 SEAT KEY
7 U CUP RING
8 O-RINGS
9 SEAT COIL SPRING
10 CLOSURE FLANGE
11 BODY O RING
12 STUD BOLT/NUT
13 GREASE FITTING W-CHECK V/V
14 RELIEF V/V
15 WRENCH BOLT
16 NECK FLANGE
17 GRAPHITE PACKING
18 WASHER
19 GLAND BUSH
20 STEM O RING

* Valves are in Inch, Dimensions are in mm.
* Face to face dimensions in accordance with API 6D & ANSI
  B16.10.
* Butt Weld Ends in accordance with ANSI B 16.25
* The contents of this page including approximate weight are
   changeable without notice.

21 GREASE FITTING
(SEALANT INJECTOR)
22 NECK-S
23 NECK O RING
24 STEM KEY
25 STEM-S
26 TRUNNION
27 TRUNNION O RING
28 DOWEL PIN
29 DRY BEARING
30 THRUST WASHER
31 BEARING RETAINER